EV Engineering & Infrastructure

  • News
  • Articles
    • Q&As
    • Tech Spotlight
  • Batteries
  • Charging
    • Wireless Charging
    • Vehicle-to-Grid (V2G)
  • Electrification
  • Testing and Safety
  • Learn
    • Learning Center
    • Tech Toolboxes
    • Webinars
  • Resources
    • Digital Editions
    • Diversity & Inclusion
    • Voices
  • Advertisers
    • Advertise
    • PR Submissions
    • Eblast Submissions
  • Subscribe

Part II: Applying EV battery intelligence in real-world systems

By Michelle Froese | April 15, 2026

Dr. Nadim Maluf, CEO of Qnovo

Electric vehicle (EV) battery systems generate a large volume of data, but the real challenge lies in how that data is used to guide decisions during operation. Engineers are now focused on turning insights into actions that improve reliability, extend battery life, and manage performance under real-world conditions.

Part I of this Q&A covered the core building blocks of battery intelligence, including software capabilities, data inputs, and modeling approaches. In Part II, the focus shifts to application, including early degradation detection, charging and energy management strategies, and integration across vehicle systems.

Dr. Nadim Maluf, CEO of Qnovo, explains how these approaches are implemented and where engineering challenges still remain.

Here’s what he has to say…

How can advanced battery analytics help identify early signs of degradation or failure in EV battery systems?

Advanced battery analytics enable the vehicle to continuously run self-diagnostics and identify subtle deviations long before they manifest as obvious faults. The critical question is whether the battery is aging normally or if early anomalies are emerging. While not every anomaly becomes a failure, every failure begins as an anomaly.

For example, analytics can detect signatures of lithium plating or identify temperature gradients that may accelerate electrolyte degradation. Because each pack has its own manufacturing fingerprint and usage history, these insights must be individualized at the vehicle level.

Once an anomaly is detected, the system can assess its severity and apply targeted mitigation (such as, modulating charging, power limits, or thermal controls) to maintain safety while reducing long-term warranty exposure.

How can real-time battery diagnostics influence charging strategies or energy management in EV systems?

Charging and energy management are central to the EV driving experience. Charging in particular, is highly personal. When to charge, how fast to charge, where to charge, and what it costs all depend on an individual driver’s preferences and constraints.

Add in the rising prevalence of V2X (vehicle-to-home or grid), and the need for the vehicle to support true personalization becomes very real.

Diagnostics can tailor charging speed to the pack’s current condition and balance fast charging with longevity. They can also pre-heat the battery when needed and adjust charging or discharge behavior to reduce degradation and minimize cost time-of-use or peak pricing.

Battery intelligence supports system-level optimization, from early degradation detection to charging and thermal management.

Each of these decisions depends on real-time battery diagnostics to choose the right action in the moment.

What engineering challenges arise when interpreting battery data across different chemistries or cell formats?

The methodology is fundamentally the same across different lithium-ion battery materials (chemistries), cell formats, and pack configurations. However, differences in material properties and design details must be accounted for.

Conventional wisdom often focuses on well-known factors, such as the OCV–SOC curve differences between NCM and LFP, or cylindrical versus prismatic formats, but that oversimplifies the problem. But real-world behavior can vary even within the “same” chemistry and design.

For instance, a manufacturer may see measurable differences between cells produced in its US, EU, and Korea-based factories due to process variation and quality controls. Electrolyte selection can also materially change performance and aging behavior, and pack geometry and thermal system design further compound these differences.

In other words, battery data must be analyzed holistically at the system level, and not solely through the lens of chemistry or cell format.

How can battery data insights be integrated into broader vehicle systems such as thermal management or powertrain control?

The battery is an integral part of the EV powertrain, tightly coupled with the charging and thermal systems. By definition, battery intelligence must operate in tandem with these systems to estimate real-time temperature rise and account for its impact on performance and longevity.

Thermal system design depends on the battery’s ability to operate across environmental extremes, whether intense heat or freezing cold, without the need for complex and expensive hardware. By integrating battery data into broader vehicle control, system optimization becomes holistic, encompassing all powertrain components.

Separating these functions defeats the purpose of using software optimization to reduce overall vehicle cost and improve affordability.

 

 

You might also like


Filed Under: Batteries, Charging, Featured Contributions, Q&As, Software, Vehicle-to-Grid (V2G)
Tagged With: batteries, charging, fastcharging, q&a, qnovo, v2g, v2x
 

Next Article

← Previous Article
Next Article →


 
“ee
EXPAND YOUR KNOWLEDGE AND STAY CONNECTED
Get the latest info on technologies, tools and strategies for EV professionals.

Tech Spotlight

  • What EV battery health data isn’t telling us
  • How ceramifying coatings protect EV battery enclosures
More Tech Spotlight

Featured Contributions

  • What EV battery health data isn’t telling us
  • How are EV battery packs designed for repairability?
  • What field failures reveal about heavy-duty e-axle validation
  • How ceramifying coatings protect EV battery enclosures
  • How has NACS evolved into the SAE J3400 EV charging standard?
More Featured Contributions

EV TECH TOOLBOX

“ee
Explore the EV Engineering Tech Toolboxes: a collection of high-impact articles that break down the latest EV design trends and technologies. Download to stay aligned with today’s evolving EV design challenges.

Learning Center

EE Learning Center

Sponsored Content

  • Converting custom materials for EV applications
  • Advantech Powers Versatile Electric Vehicle Charging Systems

EV Training Days

ev
Q&A
EV Engineering & Infrastructure
  • 5G Technology
  • Analog IC Tips
  • Battery Power Tips
  • Connector Tips
  • EDABoard Forums
  • Electro-Tech-Online Forums
  • Engineer’s Garage
  • Microcontroller Tips
  • Power Electronic Tips
  • Sensor Tips
  • Test and Measurement Tips
  • Contact Us

Copyright © 2026 Arrowfly LLC. All Rights Reserved. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Arrowfly
Privacy Policy | Advertising | About Us

Search EV Engineering & Infrastructure

  • News
  • Articles
    • Q&As
    • Tech Spotlight
  • Batteries
  • Charging
    • Wireless Charging
    • Vehicle-to-Grid (V2G)
  • Electrification
  • Testing and Safety
  • Learn
    • Learning Center
    • Tech Toolboxes
    • Webinars
  • Resources
    • Digital Editions
    • Diversity & Inclusion
    • Voices
  • Advertisers
    • Advertise
    • PR Submissions
    • Eblast Submissions
  • Subscribe